A customer consulted with photography flat bed used in township health centers

A few days ago, I received a customer inquiries about the photography flat bed, asking whether the customer is a distributor or a hospital. The customer said that he is a local distributor who purchases products for township health centers. So we sent our product information to the customer.
We have three types of photographic flat beds in total, two with and without film carts. The main difference lies in the material of the bed surface, plexiglass and carbon fiber, and density board. The customer asked again what the acrylic sheet of the bed was, and replied that the acrylic sheet was made of plexiglass. Acrylic, also known as specially treated plexiglass, is a replacement product of plexiglass. The light box made of acrylic has good light transmission performance, pure color, rich color, beautiful and flat, taking into account the two effects of day and night, long service life, and does not affect use, etc. Features.
The customer also asked about the principle of density fiberboard, and replied to the customer that the full name of density fiberboard is density fiberboard, which is made of wood fiber or other plant fibers, prepared by fiber, applied with synthetic resin, and pressed under heating and pressurizing conditions. Ask the customer whether you want MDF or acrylic plexiglass board. The customer thought for a while and chose the photography flat bed of MDF.
The customer asks how to operate the photographic flat bed when they usually want to make adjustments, and reply to the customer. We should pay attention to the bed surface of the photographic flat bed and the rail of the x-ray source pillar when taking pictures of the patient. As a result, the effect of the final shot becomes worse, and the longitudinal centerline of the photographic flat bed surface and the centerline of the x-ray source assembly pillar ground rail must also be kept parallel. The x-ray source assembly pillar cross arm rotates plus or minus ninety degrees around the axis of the pillar. , The positioning lock position must be stable. Then let the customer report our product to the hospital, and the customer will notify me if there is news.

Author:Lillian